Licensed Gutter Contractor — Columbus, MS
Seamless gutters, gutter guards, cleaning, and repairs — fabricated on-site and installed in a single day. Ensz & Sons has been protecting homes across Columbus, MS and the surrounding region from water damage for over 20 years. We show up on time, do the work right, and leave your property clean.
As a full-service gutter contractor in Columbus, MS, we handle the entire scope of gutter work — from full new installations to same-day repairs. Every material we use is commercial grade, and every gutter system we install is custom-fabricated on your property to ensure a perfect, leak-free fit. No middlemen, no subcontractors — the Ensz & Sons crew does the work themselves.
Traditional sectional gutters are joined every 10 to 12 feet. Every joint is a potential leak point — and over time, most of them become one. Seamless gutters eliminate that problem entirely by being formed from a single continuous piece of aluminum, copper, or steel, cut precisely to the length of your roofline.
We bring a portable roll-forming machine directly to your Columbus property and fabricate the gutters on-site. This means your gutters are custom-fit to your home — not ordered from a warehouse and forced to match. The result is a cleaner finish, a stronger installation, and a system that will direct water away from your foundation correctly for decades.
Available materials:
The Gutter Helmet is a patented nose-forward cover system that attaches directly to your existing gutters. Using the principle of liquid adhesion, rainwater rolls off your roof, wraps around the curved lip of the Gutter Helmet, and drains into your gutter — while leaves, pine needles, twigs, and other debris slide off the edge and fall to the ground.
This is not a screen or a mesh filter — it’s a sealed cover that works without letting debris enter the gutter channel at all. It handles the pine needle and oak leaf coverage that’s common throughout Columbus, MS and the surrounding area, and it’s backed by a lifetime transferable warranty.
Why it stands out:
Not every gutter problem requires a full replacement. If your gutters are structurally sound but have developed specific issues — a joint that’s come apart, a section pulling away from the fascia, a hole from impact damage, or improper pitch causing water to pool — repair is often the smarter and more cost-effective call.
We diagnose the problem honestly. If the repair will hold and outlast the gutters themselves, we’ll tell you. If the damage is widespread enough that repair is just delaying a replacement, we’ll tell you that too — with a clear explanation of why.
Common repairs we handle:
A clogged gutter is not a minor inconvenience — it’s a direct path to expensive structural damage. When water can’t drain, it backs up under your roofline, saturates your fascia and soffit, and eventually finds its way to your foundation. The damage that results — rot, mold, basement flooding, and foundation cracking — costs far more to fix than regular gutter cleaning.
Our cleaning service removes all debris, flushes every downspout to verify it’s clear all the way to the ground outlet, checks for signs of structural wear or damage, and reports back on what we find. You get a clean system and honest information about its condition.
Recommended cleaning schedule:
Not all gutter protection is the same, and the wrong product for your environment will fail quickly. A coarse screen that stops large leaves won’t catch the fine debris and pine needles common throughout Columbus, MS. A micro-mesh system that works beautifully on a maple-lined street may get overwhelmed by the volume of debris from a large oak canopy.
We carry and install several guard systems and recommend based on your property’s actual conditions. During your free assessment, we look at the trees around your home, your roof pitch, your gutter size, and your rainfall exposure before making a recommendation.
Systems we install:
An awning is not just a functional addition — it’s an architectural statement. The difference between a generic aluminum awning and a hand-fabricated copper or steel one is visible from the street. We design and install decorative awnings built to complement your home’s style, whether that’s a traditional Southern home, a craftsman bungalow, or a modern build.
Every awning we make is custom — no standard catalog sizes, no off-the-shelf profiles. We measure, design, fabricate, and install in-house. Copper awnings age beautifully and require no painting or maintenance. Steel awnings offer maximum rigidity and can be powder-coated in any color to match your trim or gutters.
Hiring a gutter contractor in Columbus, MS shouldn’t be a stressful experience. We keep the process simple, communicative, and predictable so you always know what’s happening and what to expect next.
Call us at (662) 435-4332 or submit a contact form on this page. You’ll speak with someone who actually knows gutters — not a call center. We’ll ask a few basic questions about your home: the type of issue you’re experiencing, the approximate linear footage of your roofline if you know it, and your location. Based on that conversation, we’ll schedule a time to come out that works for you, usually within 48 hours.
We come to your property. Our gutter contractor walks the roofline, inspects your existing system, identifies any drainage problems, checks your fascia and soffit condition, and measures the full scope of work. Then we give you an itemized quote on the spot — line by line, so you know exactly what you’re paying for and why.
We don’t use pressure tactics or time-limited discounts to rush your decision. The quote is valid, the work is real, and you’re free to take your time. If you have questions, we’ll answer them in plain language, not contractor jargon.
For seamless gutter installations, we arrive with our roll-forming machine and fabricate your gutters directly on your Columbus property. On-site fabrication means zero seams across the run of the gutter — just one continuous piece cut to the exact length of your roofline. The fit is tighter, the appearance is cleaner, and the system performs better from day one.
Our crew installs with care and precision. Gutters are hung at the correct pitch — typically a quarter inch of drop for every 10 feet of run — to ensure water moves toward downspouts without pooling. Hangers are spaced to prevent sagging under the weight of standing water or debris. Downspout placement is positioned to direct water away from your foundation and landscaping.
Most homes are completed in a single day. Before we leave, we run a water test to confirm proper flow and drainage through every downspout and inspect for any areas that could affect long-term performance.
We remove all debris, packaging, and old materials from your property before we leave. You won’t find old gutters in your yard or shingle grit on your driveway. Once done, we do a final walkthrough with you — pointing out what was done, how the system flows, and what to watch for over time. If anything isn’t right, we fix it before we go.
There are a lot of gutter contractors operating in and around Columbus, MS. Most of them can put up a gutter. The difference is in how they approach the work, how honestly they communicate, and whether the installation still looks and functions correctly three years after the job.
Ensz & Sons has been installing gutters in Columbus, MS and the surrounding region since the early 2000s. That’s two decades of working with the specific rainfall patterns, tree environments, and home styles found across this area. We’ve seen what fails and why. We’ve installed homes ranging from small ranch-styles to large properties with hundreds of linear feet of gutter. That experience means we anticipate problems before they happen and don’t make the kind of mistakes that a newer crew would make.
We back every Gutter Helmet installation with a lifetime transferable warranty. For as long as you own the home, if the system fails to keep debris out of your gutters, we make it right. The warranty transfers with the house if you sell — a real selling point for prospective buyers. We offer this because we’re confident in the installation and the product itself.
Ensz & Sons is a family business based in Columbus, MS. When you call the number on this page, you’re not reaching a national franchise with a local branch — you’re reaching the people who will actually show up to your home and do the work. We live and work in this community. Our reputation is built one home at a time. If something isn’t right, you can call us directly and we’ll make it right.
Every seamless gutter we install is fabricated on your property using a portable roll-forming machine. This is not a premium option we charge extra for — it’s how we do every job. It results in a tighter fit, zero seam joints across the full run, and a cleaner aesthetic. Contractors who use pre-cut sections are faster, but the joints are permanent weak points. We’d rather take the time to do it correctly.
Your quote will be itemized. You’ll see line items for materials, linear footage, any repairs, and labor. We explain what each line is and why it’s there. We don’t add items after the fact, we don’t adjust the price once the job is underway, and we don’t give you a lowball estimate to win the job and then add costs on-site. The quote is the price.
A lot of gutter contractors will recommend full replacement when a repair would genuinely solve the problem. We don’t operate that way. If your gutters are structurally sound and a targeted repair will extend their life by several more years, we’ll tell you. We’d rather earn your trust and have you refer us to your neighbors than oversell a homeowner who didn’t need it.
These are the questions we hear most often from Columbus, MS homeowners before they hire us.
A seamless gutter is a continuous piece of metal formed from a single roll of material, cut to the exact length of your roofline with no joints along the run. Traditional sectional gutters come in 10 to 12 foot lengths joined together with connectors and sealant — and every one of those joints is a future leak point. Over time, the sealant breaks down, the joints separate, and water starts escaping at every connection. Seamless gutters don’t have that problem because there are no mid-run joints to fail. The only seams in a seamless system are at the corners and downspout connections, which are necessary and properly sealed.
The majority of residential installations in Columbus, MS are finished in a single day. A typical single-story home with 150 to 200 linear feet of gutter usually takes 3 to 5 hours including fabrication, installation, and cleanup. Larger homes, two-story installations, or jobs that include gutter guards or fascia repairs may take longer. We give you a realistic time estimate before the job starts.
We work with aluminum, copper, and steel. Aluminum is the most widely used — it’s lightweight, rust-resistant, available in a wide range of colors, and cost-effective for most homes. Copper is the premium option: it looks exceptional, develops a natural patina over time, and can last 50 years or more with minimal maintenance. It’s popular for historic homes and high-end residential projects in Columbus. Steel is the most durable option for environments with heavy debris impact, high winds, or extreme rainfall. We’ll walk you through the trade-offs during your free assessment and recommend what makes sense for your home.
Gutter Helmet is a patented solid cover system that installs over your existing gutters. It uses the principle of surface tension: rainwater from your roof clings to the curved underside of the Helmet’s nose, follows the curve, and drips into your gutter channel. Leaves, pine needles, twigs, and other debris don’t have the weight or surface characteristics to follow that curve — they slide off the edge and fall to the ground.
Unlike mesh-based systems, Gutter Helmet is a solid cover with no openings for fine debris to pass through or clog up. It’s been independently tested to handle over 22 inches of rainfall per hour, which exceeds anything Columbus, MS storms would produce. It works across all tree environments — including the pine needle and oak leaf coverage common in this area — and it’s backed by a lifetime transferable warranty.
Repair is usually the right call when the damage is localized — a single leaking joint, a short section pulling away from the fascia, one cracked end cap, or a blocked downspout. Replacement makes more sense when there’s widespread rust or corrosion, the gutters are sagging in multiple locations due to failed hangers, the existing profile is too small for your roof’s drainage needs, or the gutters are old enough that repair is just delaying the inevitable.
We assess this honestly during your free visit. We don’t have a financial incentive to recommend replacement over repair. What we tell you will be based on what we actually see.
It depends on your tree coverage. For homes with minimal trees nearby, once per year in late fall after leaves have dropped is usually enough. For moderate coverage, twice a year works well: once in spring after pollen and seed season, once in late fall. For properties with heavy coverage, especially pine trees or large oaks which are common in Columbus, MS, cleaning every 3 to 4 months is not excessive. Clogged gutters can cause foundation damage, roof rot, and basement flooding — the cost of cleaning is small compared to those repairs.
Yes. Our workmanship is warranted against installation defects. If something fails because of how it was installed — a hanger comes loose, a downspout connection leaks, or the pitch is wrong — we come back and fix it at no charge. For Gutter Helmet systems specifically, the product carries a lifetime transferable warranty that covers the guard system as long as you own the home.
We are based in Columbus, MS and serve a wide area across Mississippi and into Alabama, including Tupelo, Starkville, Meridian, West Point, Philadelphia, Macon, Brooksville, Houston, Reform AL, and surrounding communities. If you’re not sure whether you’re in our service area, call us at (662) 435-4332 and we’ll give you a straight answer.
Ensz & Sons is based in Columbus, MS and operates across a broad service area covering most of Mississippi and parts of Alabama. We serve both residential and commercial properties. No matter where we travel within our service area, every job gets the same experienced crew, the same commercial-grade materials, and the same standard of workmanship.
Here are the areas we service:
🔥 July 2024: 15% OFF Summer Sale on All Services!
